If you’re looking for a Joomla Security Audit Guide then you will probably be following the course of a fairly established practice. In order to start the process you need to do your due diligence and know what your options are. Your options could include hiring a consultant, hiring outside service providers or you could choose to do it yourself.
In the event that you decide to take a more hands on approach to security then the first thing you need to know is that there are two major components to a security audit. The first component is the physical and the second component is the technical. In order to know what steps you should take in your particular situation, you will need to know how to do a security audit.
One thing that you want to take into consideration with regards to a security audit is your knowledge of the Joomla CMS. It goes without saying that the best way to do this is to consult a consultant and to get some direction from them. Consulting will help you focus your attention on areas that you can test easily. Just remember that with this tool, if you don’t test it properly then it’s useless!
Most companies that provide security services will give you a handbook to help you get started. Keep in mind though that not all security consultants provide the same kind of handbook. The handbook should have information that you can look over and learn more about how the security consultant evaluates the system and what you should look for.
One thing that you will want to keep in mind with regards to the handbook for a security audit is that the handbook is basically an overview. It doesn’t actually tell you the whole story. You will also want to use the handbook as a reference, but it’s going to be up to you to go over the information that is in the handbook and check it off as you go.
The next step with regards to the handbook is to determine whether or not you would like to hire a consultant to perform the security audit. A consultant can be very helpful, especially when it comes to getting the information that you need about the system right on the spot. The problem with consulting a consultant is that they will typically charge a flat fee for the job, which can be really expensive.
Another reason that consulting may not be the best option is that it is far more costly than just doing a security audit yourself. A consultant is going to require you to go over several different types of files and will generally offer a higher level of proficiency in those files. A good consultant can be worth the extra money.
If you are comfortable with computers then you can do a security audit yourself. There are several programs that can be used for this purpose. These programs are called computer security consultants, and they can make it easy for you to check a system against the different security features that Joomla offers.
You can also use someone’s manual system to help you learn the system and to test it against different file types. Don’t underestimate the value of a manual system though. It is going to be your best ally through the entire process.
When you have done your own security audit, you are going to need to turn your findings over to your organization. Be prepared to get more than a few queries about your findings! If you don’t have an organized way to handle the information then this could cause serious problems in the future.
It’s important to note that the security audit that you do yourself needs to be done in a systematic and detailed manner. You’re going to need to write up what was found, so that you can start to dig in and learn more about the system. You will also need to have a system in place to record the findings so that they can be later analyzed and you can make improvements in the system.
It’s good to realize that the security audit that you perform has many different components and that there are many things that need to be considered before beginning to do the process. Be sure to keep in mind that the details can make a huge difference in the results that you see.